Código GRBL

Última actualización: 09-07-2022

Códigos originales de respaldo para placas GRBL 1.1

Placa GRBL 1.1

GRBL 1.1

$0 = 10 (Step pulse time, microseconds)

$1 = 25 (Step idle delay, milliseconds)

$2 = 0 (Step pulse invert, mask)

$3 = 2 (Step direction invert, mask)

$4 = 0 (Invert step enable pin, boolean)

$5 = 0 (Invert limit pins, boolean)

$6 = 0 (Invert probe pin, boolean)

$10 = 1 (Status report options, mask)

$11 = 0.010 (Junction deviation, millimeters)

$12 = 0.002 (Arc tolerance, millimeters)

$13 = 0 (Report in inches, boolean)

$20 = 0 (Soft limits enable, boolean)

$21 = 0 (Hard limits enable, boolean)

$22 = 0 (Homing cycle enable, boolean)

$23 = 0 (Homing direction invert, mask)

$24 = 25.000 (Homing locate feed rate, mm/min)

$25 = 500.000 (Homing search seek rate, mm/min)

$26 = 250 (Homing switch debounce delay, milliseconds)

$27 = 1.000 (Homing switch pull-off distance, millimeters)

$30 = 1000 (Maximum spindle speed, RPM)

$31 = 0 (Minimum spindle speed, RPM)

$32 = 0 (Laser-mode enable, boolean)

$100 = 800.000 (X-axis travel resolution, step/mm)

$101 = 800.000 (Y-axis travel resolution, step/mm)

$102 = 800.000 (Z-axis travel resolution, step/mm)

$110 = 1000.000 (X-axis maximum rate, mm/min)

$111 = 1000.000 (Y-axis maximum rate, mm/min)

$112 = 600.000 (Z-axis maximum rate, mm/min)

$120 = 30.000 (X-axis acceleration, mm/sec^2)

$121 = 30.000 (Y-axis acceleration, mm/sec^2)

$122 = 30.000 (Z-axis acceleration, mm/sec^2)

$130 = 200.000 (X-axis maximum travel, millimeters)

$131 = 200.000 (Y-axis maximum travel, millimeters)

$132 = 200.000 (Z-axis maximum travel, millimeters)